- Designed to be used in two- or three-way systems, the GS60 includes a non-resonant injection-molded ABS plastic and fiberglass vented basket. The 1" copper voice coil wound on a Kapton® former provides high power handling. A parabolic propylene cone ensures long-term reliability and provides the right compromise between compliance and stiffness for flatter high frequency response. The ferrite motor includes a neodymium bucking magnet atop the pole piece for increased motor strength and sensitivity. Terminals are secured by a small PC board integrated into the inside of the basket.
- The GS60 is optimized for use in passive systems with the GS10 tweeter and the GS610C passive crossover. It can also be used in active systems or in a three-way system with the GS10 and GS40. For a combination of active and passive three-way system, use the GS60 with the GS10, GS40 and GS410C.
Features:
- Proprietary injection molded vented ABS and fiberglass basket
- 1" (25mm) copper voice coil on Kapton® former
- Ferrite motor with extended polepiece for magnetic field symmetry
- Parabolic propylene cone
- Flat progressive Nomex® spider
- Nitrile butadiene rubber surround
- Fast-on terminals secured with integrated PC board
- Grilles and multiadaptor included
- Hex screws and tools Included
Specs:
- Nominal Impedance: 4 Ohm
- RMS Power Handling: 70 W (with recommended crossover)
- Peak Power Handling: 200 W (with recommended crossover)
- Frequency Response (-3 dB): 50 Hz - 7 kHz
- Sensitivity (2.83 V/1 M): 89 dB
- Recommended Amplifier RMS Power Range: 15 W - 75 W
- Recommended Low Pass Filter Frequency and Slope: = 3.5 kHz, = 12 dB/oct
Recommended for the Audiofrog GS60
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
$19.99 CAD | $24.99 CAD
Product title
Vendor
