Audiofrog GS42

SoundsGood Auto

$298.78 USD $373.49 USD Save $74.71 USD

Only 1 left!

      Designed as an easily installed premium upgrade, the GS42 includes a proprietary injection-molded ABS and fiberglass vented basket. Ease of installation is ensured with a fabric dome neodymium tweeter that extends a mere 3.75 mm above the surround-sure to fit under factory grilles. The tweeter faceplate includes a small waveguide designed to boost the tweeter’s low frequencies and ensure a smooth transition to the midrange.


      That transition is also controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals. The GS42 includes a 1" copper voice coil wound on a Kapton® former for superior power handling.


      The GS42 can be used as a full range speaker or combined with a GS60 in an active system.


Features:
    • Injection molded ABS plastic and fiberglass vented basket
    • Parabolic polypropylene cone
    • 1" (25mm) copper voice coil on Kapton® former
    • Flat progressive Nomex® Spider
    • Ferrite magnet
    • 3/4" fabric dome neodymium tweeter
    • Tweeter includes reflection absorbing and diffusing foam pad
    • Low-profile tweeter waveguide helps to provide smooth transition to the midrange
    • Fast-on terminals secured with integrated PC board
    • Integrated passive crossover (12dB/octave high pass and 6dB/octave low pass)
    • Grille included

Specs:
  • Nominal Impedance: 4 Ohm
  • RMS Power Handling: 50 W (with recommended crossover)
  • Peak Power Handling: 150 W (with recommended crossover)
  • Frequency Response: 90 Hz - 20 kHz
  • Sensitivity (2.83 V/1 M): 88 dB
  • Recommended Amplifier RMS Power Range: 15 W - 75 W