- Designed as an easily installed premium upgrade, the GS42 includes a proprietary injection-molded ABS and fiberglass vented basket. Ease of installation is ensured with a fabric dome neodymium tweeter that extends a mere 3.75 mm above the surround-sure to fit under factory grilles. The tweeter faceplate includes a small waveguide designed to boost the tweeter’s low frequencies and ensure a smooth transition to the midrange.
- That transition is also controlled by a 12dB/octave high pass filter and 6dB/octave low pass filter. The entire crossover network is mounted to a PC board integrated into the basket, which also secures the terminals. The GS42 includes a 1" copper voice coil wound on a Kapton® former for superior power handling.
- The GS42 can be used as a full range speaker or combined with a GS60 in an active system.
Features:
- Injection molded ABS plastic and fiberglass vented basket
- Parabolic polypropylene cone
- 1" (25mm) copper voice coil on Kapton® former
- Flat progressive Nomex® Spider
- Ferrite magnet
- 3/4" fabric dome neodymium tweeter
- Tweeter includes reflection absorbing and diffusing foam pad
- Low-profile tweeter waveguide helps to provide smooth transition to the midrange
- Fast-on terminals secured with integrated PC board
- Integrated passive crossover (12dB/octave high pass and 6dB/octave low pass)
- Grille included
Specs:
- Nominal Impedance: 4 Ohm
- RMS Power Handling: 50 W (with recommended crossover)
- Peak Power Handling: 150 W (with recommended crossover)
- Frequency Response: 90 Hz - 20 kHz
- Sensitivity (2.83 V/1 M): 88 dB
- Recommended Amplifier RMS Power Range: 15 W - 75 W
Recommended for the Audiofrog GS42
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
$19.99 USD | $24.99 USD
Product title
Vendor
